- Season 6
- Season 5
- Season 4
- Season 3
- Season 2
- Season 1
What was already one of Ekstensive's biggest ground-up builds ever goes even bigger on the '52 tow truck, as Bill and his team fabricate a custom hot rod wrecker truck unlike any other; the team takes the stock out of a 2023 GMC Denali.
Bill goes back to his roots building mini-trucks with a 2023 Polaris Ranger, adding a custom camper and dancing bed; Ekstensive has built its share of ground-up builds over the years, but nothing like the metalwork on the 1952 Wrecker.
Bill sees a custom-made opportunity to turn a smashed 2022 Jeep Gladiator into a custom truck; the side-by-side scene has exploded in Texas, and Ekstensive gets a shot to show what they've got with a brand-new Polaris Ranger XP 1000.
Bill thought he'd done it all until a 2022 Ford Lightning rolls in and becomes Ekstensive's first custom air ride with an all-electric drivetrain. The team stays old school by dropping a classic '52 Wrecker to the floor with a supercharged LT4.
Bill is hard on his trucks, and that's especially true of his Baja-style 2017 F-150 race truck; after one too many jumps, Bill is ready to wake it up one more time; the team designs a one-of-one suspension for a 1952 wrecker truck.
When the outside doesn't match the inside on one of Bill's favorite muscle cars, a 1972 'Cuda, the team hatches an innovative plan for a modern, handmade redux; Bill and the team tear down a 1952 GMC wrecker to build it into a tow and show truck.
Bill loves a good challenge, especially when it's a build he and his team have never done before; while they transform a one-ton 2022 F-350 into a Baja-style Raptor, they rebuild a 1964 Rolls riddled with structural damage from the ground up.
A beloved '64 Rolls-Royce with a rusty secret rolls into the shop; the team finishes final fabrication as they prepare to ship out the '53 tanker truck.
A new customer challenges Bill with his fully customized '37 Ford Coupe, which he wants restored to its factory look; as one of their biggest builds yet, the '53 tanker proves again and again that the bigger the truck, the bigger the build.
A pristine '60s Willys transforms into something bigger, meaner and louder.
The team custom builds every part for the heavy-duty, 1,500-hp buggy.
Bill refuses to hold anything back as the '68 C10 finishes in a flourish.
A '68 C10 gets over-the-top fabrication and an epoxy river bed.
The hometown Houston Astros ask for a custom van that brings the party.
The Mecum Auction comes to town, and Bill runs four vehicles across the block with shocking results. The team starts their next monster build, a custom all-tube buggy. Building an indestructible cage requires all their fabrication skills and then some!
Actor John Cena is amazed by the transformation of his British classic '69 MGC into a custom-built masterpiece with all-American trimmings. Also, the team has to get creative building a chassis and bed for a '60s Jeep Willys entirely from scratch.
An Ekstensive favourite, a 2001 Hummer H1, needs some serious reinforcements; Bill changes things up on his completely custom, all-tube buggy by borrowing technology from monster trucks; Bill puts his daughter to work customising her 2020 Challenger.
Bill and the team work their magic to customize a brand-new 2022 International wrecker; now that the pristine 1960s Willys Jeep has been quartered, they use imaginative fabrication techniques to make it whole again.
Bill has never really liked the body of the 1974 Cadillac Eldorado, but when a client wants hers radically redesigned, Ekstensive blends old and new to make it cooler than the rest.
Twenty years back, Bill started Ekstensive Metalworks by specializing in lifting, lowering and everything in between. Fast forward to today, and he's still being put to the test with a 1928 Ford Rat Rod, a 1942 Ford pickup and a 1975 C10.
After pro wrestler and actor John Cena makes a surprise appearance at the shop, Bill and the guys begin to customize John's small '69 MGC to be a perfect fit. A new customer wants a handmade lifted suspension on his '20 Denali 2500 as a gift for his wife.
Bill and the gang split a nearly perfect 1960 Willys Jeep into four pieces to make it longer, wider and meaner. Drop shipped from halfway around the world, a 1998 AMG G-Wagon gets overhauled into a hand-built masterpiece.
The guys hit the home stretch on the '46 Ford Blue Thunder, its once-rusted shell now rebuilt into a one-of-one showstopper and Bill is surprised when John Cena drops off a '69 MGC.
Bill and the team are busy customising a 2021 F-450 King Ranch. They pull out all of the stops to give it an innovative lifted suspension setup, a painted grille and a custom-made trailer.
A client wants to surprise his dad with a custom '46 Ford Coupe. Starting with little more than a car skeleton, the team builds it from the ground up. Plus, Bill surprises his wife when he goes classy and supercharged with her 2021 Escalade.
Rocker Ted Nugent brings in his beloved '74 Bronco. Bill and the guys make a ground up, all-terrain beast unlike any other. With his creative sparks flying, Bill gets going on a build he's dreamed about for years: a handmade, all-tube, off-road buggy.
Bill gets déjà vu on a 1985 Chevy C10 square body. He and the team try to outdo themselves with a handmade chassis and air ride, interior and bed.
A 1971 Suburban returns to the shop for more power and even more custom metalwork. When a client finds parts and pieces of a '68 C10, Bill gets to work.
A '64 Lincoln has been collecting dust for years. The guys bring this classic roadster back with a late-model Coyote engine and handmade interior.
Ekstensive turns a stock 2020 Denali dually into frame-dropping, show-stopping work truck. As a final touch, Bill handmakes articulating speakers for the bed.
The team drops a new 2020 Denali dually to the floor, so make one of their longest custom chassis ever. And, they get a pro-mod Bel Air back on the track.
Bill is no stranger to truck builds getting bigger than planned, so it's no surprise when a 1971 Suburban goes even bigger with lifted air suspension and interior.
A 1996 Impala surprises the guys when they discover it's an imposter. The team improves it with custom body fabrications, rear subframe and handmade interior.
A long-time client wants to improve upon a near-perfect '68 Ford Ranger. The team creates an all-new custom chassis, handmade interior and Coyote 5.0 engine swap.
Bill and the crew lift a 2020 Chevy Silverado 5500 more than a foot with a custom heavy-duty air suspension. And, they radically overhaul the utility bed.
The team revamps a '34 Buick into a modern-day lowrider. After months of rebuilding Earl Campbell's '49 Cadillac, there's a last-minute issue.
The team push hard to rebuild NFL legend Earl Campbell's 1949 Cadillac. And, they customise a van for a disabled motocross rider.
The crew creates a ground-up build for NFL legend Earl Campbell's 1949 Cadillac. Plus, a 1940 F-100 build snowballs into a much bigger job.
A 1996 International Harvester dump truck is the largest the guys have ever customized. Plus, a client wants a custom air ride for his pristine 1934 Buick.
Bill and the team finish the work on a 1968 Chevy C10. Plus, an old dump truck arrives in the shop and is the biggest truck the crew have ever customized.
The team work on installing an engine in a 1937 International Harvester. Plus, a 2005 Chevy Colorado gets a new life as a nitrous-infused drag truck.
Bill and the team are challenged with converting a 1973 El Camino into a car for the future. Plus, they also get to work on a 2020 Freightliner.
Bill and the team fix another shop's mistake on a broken and undriveable 2017 F-350. Plus, a client wants the ultimate tailgating BBQ trailer added to their ride.
Bill knows all too well that families are the lifeblood of the custom truck scene. A customer wants to transform a 1965 Ford Falcon Club Wagon into a fully custom family cruiser. A 1966 Cobra replica gets reinforced.
In Texas, you don't just go big, you go bigger. The team does that on the year-long 1950 Ford F5 COE build when the client asks for a last-minute Cummins diesel engine swap. A twisted graphic wraps up a months-long 2001 Ford F350.
Bill and the team try to outdo themselves with a radical redesign of 1950 Ford F5 COE, starting with a bed unlike any they've built. The shop begins its first shot at remaking a '69 Corvette Stingray by building a custom chassis.
Bill and the team bring a wrecked '70 Suburban hauler back to life as a long bed, four door, crew cab dually with a 5.9 Cummins diesel engine, custom chassis and suspension; a '65 Plymouth Belvedere II gets some extra muscle with a Mopar crate Hemi.
Metal miracles is the name of the game for the team at Ekstensive Metal Works who create some of the biggest, flashiest, most creative builds anywhere.
Bill's skills are tested as he transforms the wrecked shell of a 1970 Suburban car hauler into a high-end diesel ride. And, Bill and the guys build a truck for charity.
Bill's neighbour hands over the rusty shell of a '52 Ford F4 milk truck. The guys work their fabrication skills to turn it into a dazzling diesel street rod.
Bill and the team transform a rusted '68 Bronco roadster into a high-powered off-roading truck with a supercharged engine, roll cage and waterproof interior.
Bill and the guys take a good C10 to a hundred with custom touches from inside to out including one of one interior and bed. Ekstensive makes a dream come true by modifying a 2018 Dodge Demon for an under ten second quarter mile run on the track.
The team's skills are stretched as they transform a 1940 International Harvester water truck into a mobile BBQ pit. And, a family heirloom is modernised.
Bill and the gang are back under the hood of the 2018 Camaro ZL1- rebuilding the engine to add as much power as possible before a visit to the dynamometer.
The 2018 Camaro ZL1 is already a high-performance car, but the owner wants Bill to make his even better. The guys start with an aluminium chassis and interior.
A client wants Bill to set the bar for custom SUVs with a 2018 Yukon Denali. The guys get busy with handmade chassis, body mods, interior and twin turbos. Ekstensive goes full gangster with a 1948 Mercury, remaking this legendary car from the inside out.
Bill and the guys transform a wrecked 2017 F150 into an angry-looking, one-of-a-kind vehicle. They also build a custom air suspension bike trailer.
A long-time client wants his 2017 F250 Platinum 4x4 lifted and made off-road ready. The guys oblige with a handmade 22-inch lift on 42-inch custom tyres.
Hip hop artist Slim Thug wants his rusty '59 Cadillac as flash as his car collection. The result is a black roadster that would make Batman jealous!
The owners of a run-down '63 Grumman bread truck want it transformed into an epic t-shirt vending machine. Modifications include a bar-themed interior.
A client from Houston wants his old '66 C-10 fused with the best of a '60s Impala. This ground-up build has a hand-built chassis, 6.2L engine, and a hydraulic bed.
A local restaurant owner asks Bill to customize his auction bought '61 Cadillac. The boys at Ekstensive bring the heat inside and out with fully custom interior, suspension, wheels and tires.An eye catching '63 C-10 gets its twin turbo engine all fired up.
After a remodel in the 90's, a purple '55 Chevy truck is in need of a modern update. Ekstensive doesn't disappoint creating a timeless and classy truck with a modified hood and scoop, a hand-made interior and new wood bed.
Bill and the guys customize a brand new 2017 F350 with less than 600 miles on it. They lower it with their handmade air ride and add a one-of-a-kind gooseneck hitch. The owner of a 2014 Porsche 911 wants her sports car to sound as good as it looks.
Reviews
There are no reviews yet.